Candrone
DJI Matrice 4D(DJI RC Plus 2 Enterprise (NA)) SP Plus +
Request For Quote
Precision mapping and infrastructure inspection demand an aircraft that holds up through the full mission — not just ideal conditions. The DJI Matrice 4D delivers 47 minutes of flight time, IP55 dust and water resistance, and a professional three-camera imaging system with a laser rangefinder, in an airframe that operates from -30°C to 50°C. Run it manually with the DJI RC Plus 2 Enterprise, or integrate it with DJI Dock 3 for fully automated, uncrewed deployment.
- Three-camera imaging system with laser ranging: Wide-angle, medium tele, and tele cameras covering 20 MP to 48 MP resolution, paired with a 1,800 m laser rangefinder for precise real-time distance measurement on infrastructure targets and mapping ground control.
- 47-minute flight time, IP55-rated: Extended endurance and dust and water resistance support long corridor inspections, large-area mapping campaigns, and field operations where downtime is not an option.
- 12 mm wire-level obstacle detection: Rotating LiDAR and millimeter-wave radar detect obstacles as fine as transmission wires, supporting safe autonomous flight in complex infrastructure environments. Sold separately.
- Dock 3 compatible for remote automated deployment: Integrate with DJI Dock 3 to run scheduled or triggered missions without a pilot on site. Operate independently with the DJI RC Plus 2 Enterprise when manual control is preferred.
- -30°C to 50°C operating range: Designed for Canadian conditions, from winter pipeline corridors to summer construction and utility inspection campaigns.
Batteries sold separately.
Overview and Who It's For
The DJI Matrice 4D is designed for mapping teams, inspection crews, and enterprise operators who need a high-endurance, multi-sensor aircraft capable of both manual and automated deployment. It suits teams running photogrammetry, digital twin creation, corridor inspection, and asset monitoring workflows where image quality, operational range, and platform durability are all requirements.
- Survey and mapping: 5-direction oblique and 3-direction orthophoto capture modes, real-time terrain following, and Smart 3D Capture support high-precision photogrammetry and digital twin deliverables at scale.
- Powerline and infrastructure inspection: Detect pin cracks, wiring anomalies, and structural irregularities at safe standoff distances, with laser-verified positioning and automated flight routing along corridors.
- Oil, gas, and energy monitoring: Automate inspection of remote or hazardous infrastructure with dock-based deployment, reducing the need for ground crews in the field.
- Public safety and search and rescue: Night Scene mode supports full-colour night vision for low-light operations. For teams requiring integrated thermal imaging, see the DJI Matrice 4TD.
Imaging System
| Camera | Sensor | Resolution | Focal Length | Aperture |
|---|---|---|---|---|
| Wide-Angle | 4/3-inch CMOS | 20 MP | 24 mm equivalent | f/2.8 to f/11, mechanical shutter |
| Medium Tele | 1/1.3-inch CMOS | 48 MP | 70 mm equivalent | f/2.8 |
| Tele | 1/1.5-inch CMOS | 48 MP | 168 mm equivalent | f/2.8 |
Key Specs
| Specification | Value |
|---|---|
| Max flight time | Up to 47 minutes |
| Ingress protection | IP55 |
| Operating temperature | -30°C to 50°C (-22°F to 122°F) |
| Max wind resistance | 12 m/s |
| Laser rangefinder range | Up to 1,800 m |
| Max transmission range (D-RTK 3 Relay) | 25 km (sold separately) |
| Obstacle avoidance | Rotating LiDAR and millimeter-wave radar, 12 mm wire detection (sold separately) |
| Night vision | Night Scene mode (full-colour) |
| Controller | DJI RC Plus 2 Enterprise |
| Dock compatibility | DJI Dock 3 |
| Fleet management | DJI FlightHub 2 |
FAQs
What is the difference between the Matrice 4D and the Matrice 4TD?
The Matrice 4D is configured for precision mapping, photogrammetry, and multi-sensor inspection with wide-angle, medium tele, and tele cameras plus a laser rangefinder. The Matrice 4TD adds a 640×512 infrared thermal camera and NIR auxiliary light, making it the better fit for public safety, thermal inspection, and night operations requiring heat detection.
Does the Matrice 4D require the DJI Dock 3 to operate?
No. The Matrice 4D operates independently with the DJI RC Plus 2 Enterprise for manual piloted missions. DJI Dock 3 integration is available for automated remote deployment without a pilot on site.
Is obstacle avoidance included?
360-degree obstacle sensing using rotating LiDAR and millimeter-wave radar is sold separately. The system provides 12 mm wire-level detection for safe autonomous flight near transmission infrastructure.
Are batteries included?
Batteries are sold separately. Contact our team to confirm compatible battery options and charging hub availability for your configuration.
Warranty and Returns
This product is covered under the manufacturer's limited warranty. Candrone's standard return and exchange policy applies.
View Candrone's Warranty and Returns Policy
For warranty claims or support, contact our team at 1-888-461-5742 or visit our Contact page.
Get a Quote
Got a competing quote you want to beat or looking for a customized package. We'll put together an itemized quote for your review.
Schedule a Demo
See the DJI Matrice 4D(DJI RC Plus 2 Enterprise (NA)) SP Plus + in action virtually or on-site. Contact our team to setup a demo.
Featured post
Understanding DJI Enterprise Care Service Plan (SP): A Guide for Buyers
Are you considering investing in a DJI Enterprise drone or accessories like the Matrice 350, Matrice 30T, Mavic 3 Enterprise, or Zenmuse L1? If so, you've likely come across the...
)%20SP%20Plus%20+){kind=link}