Emlid Reach LoRa Antenna - RS3 / RS2+ / RS2 / RS+

Emlid Reach RS+ LoRa Antenna brings long-range RTK correction communication to legacy Reach base-to-rover workflows, enabling field teams to maintain correction links where cellular coverage is unavailable.

• Restore LoRa radio operation: The antenna is required for the built-in LoRa radio on the Reach RS+ and original Reach RS to transmit and receive RTK corrections.
• Work without cellular coverage: The 868/915 MHz LoRa link supports base-to-rover RTK correction delivery at distances up to 8 km line-of-sight without a SIM card or NTRIP network.
• Support legacy Reach workflows: Compatibility with Reach RS+, original Reach RS, and Reach M+ LoRa Radio provides a replacement or spare antenna for existing Emlid systems.
• Prepare for remote fieldwork: LoRa correction delivery supports surveying, forestry, environmental, and mining operations where LTE connectivity is limited or unavailable.

Overview and Who It's For

The Reach RS+ LoRa Antenna connects to the LoRa antenna port on the Reach RS+ and original Reach RS receivers, enabling the built-in LoRa radio to transmit and receive RTK correction data between base and rover at distances up to 8 km line-of-sight. It is also compatible with the Reach M+ external LoRa radio module.

• Surveying and mapping teams: Keep a replacement or spare antenna available for base-to-rover RTK setups using RS+ or original RS receivers without cellular coverage.
• Forestry and environmental teams: Maintain LoRa correction delivery during remote-site surveys where cellular connectivity is unavailable.
• Mining teams: Support field operations where base-to-rover LoRa links are the primary correction delivery method.

Note: This antenna is compatible with the Reach RS+ and original Reach RS only. It is not the correct antenna for the RS2, RS2+, or RS3. Those receivers use the ANT-LORA-2 LoRa antenna. If you are unsure which receiver you have, contact our team before ordering.

What's Included

• Emlid Reach RS+ LoRa Antenna x1

Regulatory and Compliance

FAQs

Is this the correct LoRa antenna for the RS2+ or RS3?
No. This antenna is compatible with the Reach RS+ and original Reach RS only. The RS2, RS2+, and RS3 use a different LoRa antenna, Emlid SKU ANT-LORA-2. Contact our team if you are unsure which receiver model you have before ordering.

Do I need this antenna to use the LoRa radio on my RS+?
Yes. The antenna must be attached before the built-in LoRa radio can function. Never power on the LoRa radio without the antenna connected -- operating without an antenna can damage the radio module.

What happens if the antenna is lost or damaged in the field?
The LoRa correction link goes down entirely. Without it, you would need to switch to NTRIP corrections via LTE or adjust your correction method on site. Keeping a spare in the field kit avoids this scenario.

Does it work with the Reach M+ LoRa radio module?
Yes. This antenna is also compatible with the external Reach M+ LoRa radio module used on UAV platforms and mobile mapping rigs.

Warranty and Returns

This product is covered under the manufacturer's limited warranty. Candrone's standard return and exchange policy applies.

View Candrone's Warranty and Returns Policy

For warranty claims or support, contact our team at 1-888-461-5742 or visit our Contact page.