RC Plus 2

Enterprise field operations demand a controller that keeps up - clear in direct sunlight, stable when the signal path is obstructed, and reliable across the full working day without a power interruption. The DJI RC Plus 2 Enterprise Enhanced delivers a 7.02-inch 1400-nit display, O4 Enterprise Enhanced transmission with SDR and optional 4G hybrid connectivity, and up to 6 hours of combined runtime in a single IP54-rated unit.

• 1400-nit display readable in direct sunlight: The 7.02-inch 1920 x 1200 HD touchscreen with 10-point multi-touch maintains full visibility in the bright outdoor conditions that wash out standard screens, so operators stay oriented without shading the display or squinting during critical manoeuvres.
• O4 Enterprise Enhanced with SDR and 4G hybrid: Up to 25 km of transmission range under FCC standard, with built-in high-gain antenna array and support for SDR radio link alongside optional 4G cellular connectivity via DJI Cellular Dongle 2 - keeping the video feed stable in mountainous terrain, urban canyons, and infrastructure-dense environments where direct line-of-sight is interrupted.
• Up to 6 hours of operating time: The internal 6500 mAh battery provides approximately 3.8 hours. Add the optional WB37 external battery for up to 6 hours of continuous operation - covering day-long inspection campaigns, extended SAR deployments, and multi-sortie site surveys without returning to a charging point.
• Hot-swappable WB37 external battery: Swap the external battery without powering down the controller or landing the aircraft, maintaining uninterrupted mission control across long sorties.
• Expanded interface for PSDK and third-party integration: The Enhanced configuration adds expanded interface components for broader compatibility with PSDK accessories and third-party payloads, making it the right choice for operators integrating custom sensors or specialised industry hardware alongside standard DJI payloads.

Overview and Who It's For

The DJI RC Plus 2 Enterprise Enhanced is the dedicated professional controller for the DJI Matrice 400 and the full Matrice 4 Series (M4E, M4T, M4D, M4TD). It runs DJI Pilot 2 on Android 11 with 8 GB RAM and 128 GB of internal storage, providing a smooth, low-latency control interface with direct access to mission planning, payload management, and real-time data overlays without depending on a paired smartphone. Hall-effect control sticks, customisable hard keys, dual rear paddle controls, and tricolour status LEDs with auto-brightness give experienced operators immediate physical feedback and fast access to frequently used functions. The HDMI 1.4 port enables output to an external monitor for command-post visibility or dual-operator setups. IP54 weatherproofing and a -20 to 50 degrees C operating range cover the full spectrum of Canadian field conditions.

Primary verticals:

• Civil and Power - Transmission line inspection, bridge and infrastructure survey, and corridor mapping operations where 25 km transmission range and SDR/4G hybrid redundancy extend operational reach beyond what standard controllers support.
• Public Safety - Search and rescue, emergency response, and law enforcement operations where 6-hour runtime, IP54 weatherproofing, and a sunlight-readable display are operational requirements rather than conveniences.
• Mining and Aggregate - Site survey and stockpile monitoring campaigns where day-long battery endurance and stable signal through complex terrain reduce mission interruptions.

Key Specs

What's Included

• DJI RC Plus 2 Enterprise Enhanced controller x1
• WB37 Intelligent Battery x1 (sold separately)

Note: Confirm exact in-box contents with Candrone at point of order. The WB37 external battery is required for the full 6-hour runtime and may or may not be included depending on the specific configuration purchased.

Regulatory and Compliance

FAQs

What is the difference between the RC Plus 2 Enterprise and the RC Plus 2 Enterprise Enhanced?
Both controllers feature the same 7.02-inch 1400-nit display, IP54 rating, O4 Enterprise transmission, and battery system. The Enhanced configuration adds expanded interface components that broaden compatibility with PSDK accessories and third-party payloads. For operators running only standard DJI payloads (H30T, L2, P1, S1, V1), the standard Enterprise edition is sufficient. For operators integrating custom sensors, third-party cameras, or specialised industry hardware via PSDK, the Enhanced edition is the right choice.

Do I need to purchase the WB37 battery separately?
The WB37 Intelligent Battery extends total operating time from approximately 3.8 hours (internal battery only) to approximately 6 hours. It is not always included with the controller - confirm with Candrone's Solutions team at point of order. The WB37 is hot-swappable, so it can be replaced mid-mission without powering down or landing.

Can the RC Plus 2 Enterprise Enhanced control the Matrice 350 RTK or Matrice 30 Series?
No. The RC Plus 2 is designed exclusively for the Matrice 400 and Matrice 4 Series (M4E, M4T, M4D, M4TD). The Matrice 350 RTK uses the original RC Plus, and the Matrice 30 Series uses the RC Plus or RC Plus 2 depending on configuration. Contact Candrone's Solutions team to confirm the correct controller for your specific aircraft.

What does the HDMI 1.4 port allow?
The HDMI 1.4 port enables output to an external monitor for larger-screen mission monitoring, command-post situational awareness, or dual-operator setups where one pilot flies and a second operator manages payload and data. Maximum output resolution is 1080p at 60 fps.

Does the RC Plus 2 support 4G LTE connectivity?
Yes, with the optional DJI Cellular Dongle 2 accessory. The 4G link operates alongside the standard O4 Enterprise radio link and SDR, providing a third independent transmission channel for environments where direct-frequency transmission is blocked or degraded. Contact Candrone for DJI Cellular Dongle 2 availability and pricing.

Warranty and Returns

This product includes a standard DJI Enterprise manufacturer warranty. Candrone's standard return and exchange policy applies. DJI Enterprise Care service plans are available separately -- contact Candrone's Solutions team for details.

View Candrone's Warranty and Returns Policy

For support or to speak with a solutions specialist, contact our team at 1-888-461-5742, visit our Contact page, or book a call with our Civil and Power specialist.