DJI Lito Series 360 Propeller Guard

The DJI Lito Series 360-Degree Propeller Guard fully wraps the propellers of the DJI Lito 1 and Lito X1, reducing the risk of injury from spinning blades and protecting the propellers from obstacle contact - making it the right accessory for indoor practice, learning environments, and complex outdoor spaces where obstacles are close.

• Full propeller enclosure: The lightweight 94-gram guard wraps all four propellers in a continuous frame, keeping people and objects at a safe distance from the blades during indoor flights or tight spaces.
• Designed for beginners: Particularly useful while learning to fly - the guard reduces the consequences of minor control errors in environments where people, furniture, or other objects are nearby.
• Fits both Lito 1 and Lito X1: A single accessory compatible with both aircraft in the DJI Lito Series, without modification.
• Lightweight construction: At 94 grams, the guard adds minimal mass to the aircraft, though note that total aircraft weight will exceed 250 grams once installed - check current local regulations before flight.

Overview and Who It's For

The DJI Lito Series 360-Degree Propeller Guard is designed for new pilots who want an additional safety layer during their first flights, indoor flyers practising in confined spaces, and anyone operating near people where blade contact is a concern. The guard requires firmware version v01.00.0100 or later on the aircraft before installation. Once installed, it will affect power performance, video transmission range, and obstacle sensing capability - fly at lower speeds and in open areas when the guard is in use, and avoid windy conditions.

Note: After installation, the aircraft will weigh more than 250 grams. Check current Transport Canada regulations before flying with the guard attached.

Key Specs

What's Included

• 360-Degree Propeller Guard (set) x1

Regulatory and Compliance

Always confirm current Transport Canada RPAS requirements before each operation. Regulations vary by region and are subject to change. Do not use the propeller guard in windy conditions. When flying with the guard, obstacle sensing performance will be affected -- fly in open areas whenever possible.

FAQs

Can I use the propeller guard outdoors?
Yes, but with important limitations. Do not use the guard in windy conditions. When installed, the aircraft's power performance, video transmission range, and obstacle sensing capability are all reduced. Maximum takeoff altitude with a remote controller is 1500 m, maximum flight altitude is 120 m, and maximum flight distance is 500 m. Fly in open areas and at lower speeds when the guard is attached.

Does the propeller guard require a firmware update before installation?
Yes. Ensure the aircraft firmware has been updated to v01.00.0100 or later before installing the guard on either the Lito 1 or Lito X1. Flight stability cannot be guaranteed on earlier firmware versions.

Will the propeller guard add enough weight to change my registration requirements in Canada?
With the guard installed, the aircraft will exceed 250 grams. This may affect your registration and operational requirements under Transport Canada regulations. Always confirm current requirements at tc.canada.ca before flying with the guard attached.

Warranty and Returns

This product includes a 1-year manufacturer warranty from DJI. Candrone's standard return and exchange policy applies.

View Candrone's Warranty and Returns Policy

For support, contact our team at 1-888-461-5742 or visit our Contact page.