Manifold 3 Accessory Kit (Matrice 400)

Manifold 3 Accessory Kit (Matrice 400) provides a secure connection between Manifold 3 and DJI Matrice 400, enabling a stable and reliable installation during operation.

• Secure Manifold 3: Attach Manifold 3 to DJI Matrice 400 with a dedicated connector, coaxial cable, and mounting hardware.
• Maintain a reliable connection: Properly tightened coaxial cable screws help prevent disconnection caused by flight vibration.
• Support water resistance: Fully tightening the coaxial cable screws helps prevent reduced water resistance from loose connections.
• Install with included tools: The supplied screwdriver handle and bits support installation, while the 1.5 mm bit can also press the Manifold 3 reset button.

Overview and Who It's For

Manifold 3 Accessory Kit (Matrice 400) allows Manifold 3 to be securely attached to DJI Matrice 400 for a stable and reliable connection during operation. The kit includes the connector, coaxial cable, required screws, and installation tools.

• DJI Matrice 400 users: Add the hardware required to securely attach Manifold 3 to the aircraft.
• Manifold 3 users: Install Manifold 3 on a compatible DJI Matrice 400 using the dedicated connection components.

Key Specs

What's Included

• Matrice 400 connector × 1
• Matrice 400 coaxial cable × 1
• Connector screws for Matrice 400 × 6
• Connector screws for Manifold 3 × 6
• Coaxial cable screws for Matrice 400 × 2
• Coaxial cable screws for Manifold 3 × 2
• Screwdriver handle × 1
• Screwdriver bit (Phillips + 2.5 mm hex) × 1
• Screwdriver bit (1.5 mm + 2.0 mm hex) × 1

FAQs

What is the Manifold 3 Accessory Kit used for?
The kit securely attaches Manifold 3 to DJI Matrice 400 for a stable and reliable connection during operation.

Which products are compatible with this accessory kit?
The kit is compatible with Manifold 3 and DJI Matrice 400.

Why do the coaxial cable screws need to be fully tightened?
Loose connections can cause disconnection or reduce water resistance due to flight vibration.

Can the included tools be used to reset Manifold 3?
Yes. The included 1.5 mm screwdriver bit can be used to press the reset button on Manifold 3 and restore it to factory defaults.

Warranty and Returns

This product is covered under the manufacturer's limited warranty. Candrone's standard return and exchange policy applies.

View Candrone's Warranty and Returns Policy

For warranty claims or support, contact our team at 1-888-461-5742 or visit our Contact page.