LKTOP 200W Battery Charging Hub for Matrice 4T / 4E - 3-Port with LCD Display

The Matrice 4 Series Battery Charging Hub (200W) brings fast, sequential OEM battery management to Matrice 4 operations, enabling enterprise teams to keep three flight batteries cycling efficiently between missions from a portable charger or field power station.

• Sequential 3-battery charging from highest to lowest power level - The hub prioritises the most-charged battery first, ensuring the battery with the least time left is always next to top up while your most charged unit is ready to fly.
• Two modes built for how you operate - Standard Mode completes full 100% charge cycles; Ready-to-Fly Mode charges to 90% and holds, cutting turnaround time for teams where rapid redeployment takes priority over a full charge.
• Pairs with the Power 1000 for field-independent operation - In addition to the 240W Portable Charger, the hub connects to the Power 1000 portable power station, enabling battery cycling on remote sites without grid access.
• OEM compatibility with SDC Fast Charge Cable included - Designed exclusively for the BPX345-6741-14.76 Matrice 4 Intelligent Flight Battery, with the SDC Fast Charge Cable included in the box from day one.

Overview and Who It's For

The Matrice 4 Series Battery Charging Hub (200W) is the official 200W OEM charging hub for Matrice 4 Series Intelligent Flight Batteries, providing sequential charging of up to three batteries via the DJI 240W Portable Charger (model CDX230-240) or the Power 1000 portable power station. It prioritises charging from highest to lowest battery level, so the most-charged battery is always ready to fly first while the hub works through the remaining units in sequence.

Two charging modes address the primary field scenarios. Standard Mode completes a full charge cycle to 100% per battery - suited for teams with time between deployments or returning from a full day of operations. Ready-to-Fly Mode charges each battery to 90% and holds at that level, designed for rapid-response and time-sensitive deployments where the last few minutes of charge time is less important than getting the aircraft back in the air.

Compatibility with the Power 1000 makes this hub practical for operations on remote sites without access to a mains outlet, pairing portable power with intelligent battery management in a single field-ready setup.

The hub is designed exclusively for use with the BPX345-6741-14.76 Matrice 4 Intelligent Flight Battery and requires the DJI 240W Portable Charger (CDX230-240) as its power source when used without the Power 1000. The SDC Fast Charge Cable is included in the box.

Best suited for:

• Public Safety - Rapid-response deployments where Ready-to-Fly Mode keeps batteries at 90% and cuts turnaround time for back-to-back sorties
• Energy and Utilities - Inspection teams managing three-battery rotations on pipeline, tower, and infrastructure sites, including remote locations using the Power 1000
• Forestry and Environmental - Field operations requiring reliable OEM battery management between flights at sites with or without grid access
• Mining - Site inspection and survey teams operating Matrice 4 Series platforms over extended shifts requiring sequential battery cycling

What's Included

• Matrice 4 Series Battery Charging Hub (200W) x1
• SDC Fast Charge Cable x1

Note: DJI 240W Portable Charger (CDX230-240) and Matrice 4 Intelligent Flight Batteries are sold separately and are not included.

Training and Certification

Operating the Matrice 4 Series in Canada requires a valid Advanced RPAS Pilot Certificate and aircraft registration with Transport Canada. Candrone Academy offers online ground school and exam prep for pilots looking to get certified or upgrade to Advanced.

For teams deploying this aircraft in public safety or professional contexts, Advanced RPAS Certification unlocks operations near people and in controlled airspace commonly required for municipal, SAR, and emergency services use.

• Explore Candrone Academy training
• Book a free consultation

FAQs

How does sequential charging work on this hub? The hub charges one battery at a time, starting with the highest charge level and working down to the lowest. The battery with the most remaining charge completes first and is ready to fly soonest, ensuring a charged battery is always available while the hub works through the remaining units.

What is the difference between Standard Mode and Ready-to-Fly Mode? Standard Mode charges each battery to 100%, completing a full charge cycle -- ideal when time between missions allows a complete top-up. Ready-to-Fly Mode charges to 90% and holds at that level, suited for time-sensitive operations where faster turnaround is more important than the last 10% of capacity.

Can I use this hub with the Power 1000 on a remote site? Yes. The hub is compatible with the Power 1000 portable power station, enabling battery cycling away from mains power. This makes it practical for forestry, pipeline, and field operations where grid access is unavailable. Confirm that your Power 1000 has sufficient charge before beginning a cycle.

Is the DJI 240W Portable Charger included? No. The hub includes a Charging Hub and SDC Fast Charge Cable. The DJI 240W Portable Charger (CDX230-240) is required for operation and is sold separately. The Power 1000 is also a compatible power source and is sold separately.

Can I use this hub with the previous 100W charging hub batteries or other battery models? No. This hub is exclusively compatible with the BPX345-6741-14.76 Matrice 4 Series Intelligent Flight Battery. Do not use it with other battery models, as this may create safety risks or damage the batteries and hub.

Warranty and Returns

This product is covered under the manufacturer's limited warranty. Candrone's standard return and exchange policy applies.

View Candrone's Warranty and Returns Policy

For warranty claims or support, contact our team at 1-888-461-5742 or visit our Contact page.