GreenValley LiAir X3C-H UAV LiDAR System

UAV LiDAR payloads that require external GNSS antennas, separate camera mounts, and multi-component setup add time and complexity to every deployment. The GreenValley LiAir X3C is a compact integrated UAV LiDAR system for the DJI Matrice 300 series that combines a high-scan-rate LiDAR sensor, high-resolution mapping camera, and inertial navigation into a single 1.12 kg unit, removing the pre-flight complexity that slows survey teams down when conditions and schedules are tight.

• 1,920,000 points per second with triple return for dense, detailed point clouds: The high scan rate with triple return capability captures fine surface detail and penetrates through vegetation to ground level in a single pass, producing the point cloud density required for powerline component classification, individual tree segmentation, terrain modelling, and volumetric calculation without multiple flight lines over the same area.
• 360-degree horizontal and 40.3-degree vertical field of view for comprehensive coverage: The wide FOV captures full horizontal coverage beneath the aircraft and sufficient vertical range to resolve features above and below the flight path, reducing the number of flight lines required to achieve complete site coverage and improving data quality on sloped terrain and corridor surveys.
• Integrated high-resolution mapping camera in a 1.12 kg system: The built-in camera captures co-registered imagery alongside LiDAR data in every flight, enabling true-colour point clouds and orthophoto production without a separate camera payload, additional mounting hardware, or a second flight over the survey area.
• Purpose-built for the DJI Matrice 300 series: The integrated design and mounting interface are optimised for the M300 platform, enabling straightforward installation without custom brackets, third-party adapters, or payload configuration work before each deployment.
• Compatible with LiGeoreference, LiDAR360, and LiPowerline: Data processes through GreenValley's georeferencing and post-processing software suite for terrain modelling, forestry analysis, powerline classification, and mining volume workflows in a consistent end-to-end pipeline.

Overview and Who It's For

The LiAir X3C is designed for survey companies, power utility inspection teams, forestry operations, and mining survey crews who need a capable, compact UAV LiDAR system for the DJI Matrice 300 series that delivers high scan rate performance and integrated camera output without the setup overhead of multi-component payloads. At 1.12 kg with an integrated camera, it is well suited to frequent deployment operations where pre-flight time matters and payload simplicity reduces the risk of field configuration errors. Pairs with LiGeoreference for georeferencing, LiDAR360 for point cloud processing, and LiPowerline for powerline inspection workflows.

Primary verticals:

• Civil and Power: Powerline corridor inspection, vegetation clearance analysis, and conductor classification at high point density with LiPowerline processing support.
• Forestry and Environmental: Forest inventory, canopy height modelling, and terrain mapping beneath vegetation with triple return capability for ground penetration through dense canopy cover.
• Mining: Volume calculation, stockpile survey, and site terrain mapping at the point density required for accurate volumetric reporting and change detection between survey epochs.
• Survey and Mapping: Topographic survey, HD map production, and orthophoto generation from co-registered LiDAR and camera data in a single flight.

Key Specs

What's Included

• GreenValley LiAir X3C sensor unit x1

Confirm complete in-box contents with Candrone at point of order. DJI Matrice 300 series sold separately.

Regulatory and Compliance

Regulations are subject to change. Always verify current Transport Canada RPAS requirements at tc.canada.ca before each operation.

FAQs

Does the LiAir X3C require an external GNSS antenna?
Confirm with Candrone before purchase. Some LiAir configurations on the DJI M300 use the aircraft's onboard RTK positioning directly without an external antenna. Contact our Solutions team to confirm the exact GNSS setup required for the X3C on your Matrice 300 platform.

What is the difference between the LiAir X3C and the LiAir X3C-H?
The X3C-H includes a higher-resolution camera configuration alongside the LiDAR sensor. Both share the same compact integrated form factor and M300 compatibility. Contact Candrone to compare specifications and determine which variant suits your specific deliverable requirements.

Can the LiAir X3C data be used for powerline inspection reporting?
Yes. Point cloud data from the X3C processes through GreenValley LiPowerline for automated conductor classification, vegetation clearance analysis, and KML inspection report generation. Contact Candrone for current LiPowerline licensing options.

Warranty and Returns

This product includes a standard manufacturer warranty from GreenValley International. Candrone's standard return and exchange policy applies.

View Candrone's Warranty and Returns Policy

For support or to speak with a solutions specialist, contact our team at 1-888-461-5742 or visit our Contact page.